Complete List of MS-DOS Commands
2677
30/11/2021
by
Tim Fisher
VP and General Manager, Lifewire.com
Tim Fisher has 30+ years' professional technology experience. He focuses on support and Microsoft topics but is an expert in all areas of tech. He's also the VP and General Manager of Lifewire.
our editorial process
Tim Fisher
Updated on February 16, 2021
reviewed by
Michael Barton Heine Jr
Lifewire Tech Review Board Member
Michael Heine is a CompTIA-certified writer, editor, and Network Engineer with 25+ years' experience working in the television, defense, ISP, telecommunications, and education industries.
our review board
Article reviewed on Mar 05, 2020
Michael Barton Heine Jr
Tweet
Share
Windows
The Ultimate Laptop Buying Guide
DOS commands are the commands available in MS-DOS that are used to interact with the operating system and other command line based software.
Unlike in Windows, DOS commands are the primary way in which you use the operating system. Windows and other modern OSs use a graphics-based system designed for touch or a mouse.
Miguel Co / Lifewire
If you use Windows (like Windows 10, 8, 7, etc.), then you have no need for DOS commands because you don't have MS-DOS. Check below the table at the bottom of this page for more information.
A Complete List of MS-DOS Commands
MS-DOS 6.22 (CHKDSK Command).
Below is a complete list of MS-DOS commands, commonly referred to as just DOS commands, available as of MS-DOS 6.22:
MS-DOS Command List
Command
Description
Append
The append command can be used by programs to open files in another directory as if they were located in the current directory.
Assign
The assign command is used to redirect drive requests to a different drive. This command can also show drive assignments and reset drive letters to their original assignments.
Attrib
The attrib command is used to change the attributes of a single file or a directory.
Break
The break command sets or clears extended CTRL+C checking on DOS systems.
Call
The call command is used to run a script or batch program from within another script or batch program. The call command has no effect outside of a script or batch file. In other words, running the call command at the MS-DOS prompt will do nothing.
Cd
The cd command is the shorthand version of the chdir command.
Chcp
The chcp command displays or configures the active code page number.
Chdir
The chdir command is used to display the drive letter and folder that you are currently in. Chdir can also be used to change the drive and/or directory that you want to work in.
Chkdsk
The chkdsk command, often referred to as check disk, is used to identify and correct certain hard drive errors.
Choice
The choice command is used within a script or batch program to provide a list of choices and return the value of that choice to the program.
Cls
The cls command clears the screen of all previously entered commands and other text.
Command
The command command starts a new instance of the command.com command interpreter.
Copy
The copy command copies one or more files from one location to another.
Country
The country command is used in the CONFIG.SYS file to tell MS-DOS to use country-specific text conventions during processing.
Ctty
The ctty command is used to change the default input and output devices for the system.
Date
The date command is used to show or change the current date.
Dblspace
The dblspace command is used to create or configure DoubleSpace compressed drives.
Debug
The debug command starts Debug, a command line application used to test and edit programs.
Defrag
The defrag command is used to defragment a drive you specify. The defrag command is the command line version of Microsoft's Disk Defragmenter.
Del
The del command is used to delete one or more files. The del command is the same as the erase command.
Deltree
The deltree command is used to delete a directory and all the files and subdirectories within it.
Device
The device command is used in the CONFIG.SYS file to load device drivers into memory.
Devicehigh
The devicehigh command is used in the CONFIG.SYS file to load device drivers into upper memory.
Dir
The dir command is used to display a list of files and folders contained inside the folder that you are currently working in. The dir command also displays other important information like the hard drive's serial number, the total number of files listed, their combined size, the total amount of free space left on the drive, and more.
Diskcomp
The diskcomp command is used to compare the contents of two floppy disks.
Diskcopy
The diskcopy command is used to copy the entire contents of one floppy disk to another.
Dos
The dos command is used in the CONFIG.SYS file to specify the memory location for DOS.
Doskey
The doskey command is used to edit command lines, create macros, and recall previously entered commands.
Dosshell
The dosshell command starts DOS Shell, a graphical file management tool for MS-DOS. The dosshell command was only available up to MS-DOS 6.0 but most MS-DOS 6.22 installations were upgrades from previous versions so the dosshell command is usually still available.
Drvspace
The drvspace command is used to create or configure DriveSpace compressed drives. DriveSpace, executed using the drvspace command, is an updated version of DoubleSpace. DriveSpace is an updated version of DoubleSpace, executed using the dblspace command.
Echo
The echo command is used to show messages, most commonly from within script or batch files. The echo command can also be used to turn the echoing feature on or off.
Edit
The edit command starts the MS-DOS Editor tool, which is used to create and modify text files.
Edlin
The edlin command starts the Edlin tool, which is used to create and modify text files from the command line. Edlin was only available up to MS-DOS 5.0 so unless your version of MS-DOS 6.22 was upgraded from 5.0, you likely won't see the edlin command.
Emm386
The emm386 command is used to give MS-DOS access to more than 640 KB of memory.
Exe2bin
The exe2bin command is used to convert .EXE files to binary format.
Erase
The erase command is used to delete one or more files. The erase command is the same as the del command.
Exit
The exit command is used to end the command.com session that you're currently working in.
Expand
The expand command is used to extract the files and folders contained in Microsoft Cabinet (CAB) files.
Fasthelp
The fasthelp command provides more detailed information on any of the other MS-DOS commands.
Fastopen
The fastopen command is used to add a program's hard drive location to a special list stored in memory, potentially improving the program's launch time by removing the need for MS-DOS to locate the application on the drive.
Fc
The fc command is used to compare two individual or sets of files and then show the differences between them.
Fcbs
The fcbs command is used in the CONFIG.SYS file to specify the number of file-control blocks for file sharing.
Fdisk
The fdisk command is used to create, manage, and delete hard drive partitions.
Files
The files command is used in the CONFIG.SYS file to specify the maximum number of files that can be open at the same time.
Find
The find command is used to search for a specified text string in one or more files.
For
The for command is used to run a specified command for each file in a set of files. The for command is most often used within a batch or script file.
Format
The format command is used to format a drive in the file system that you specify.
Goto
The goto command is used in a batch or script file to direct the command process to a labeled line in the script.
Graphics
The graphics command is used to load a program that can print graphics.
Help
The help command provides more detailed information on any of the other Command Prompt or MS-DOS commands.
If
The if command is used to perform conditional functions in a batch file.
Include
The include command is used in the CONFIG.SYS file to allow you to use the commands from one CONFIG.SYS block within another.
Install
The install command is used in the CONFIG.SYS file to load memory-resident programs into conventional memory.
Interlnk
The interlnk command is used to connect two computers via a serial or parallel connection to share files and printers.
Intersvr
The intersvr command is used to start the Interlnk server and to copy Interlnk files from one computer to another.
Join
The join command is used to attach a drive letter to a directory located on another drive. It's similar to the subst command which associates a drive letter with a local directory.
Keyb
The keyb co
mmand is used to configure a keyboard for a specific language.When you can go into MS Dos and basically create a program to print one piece of paper on a Dot Matrix printer, the… https://t.co/j7fn9jBvdS
— ☠FLOKI☠ Mon Aug 17 13:09:21 +0000 2020
Label
The label command is used to manage the volume label of a disk.
Lastdrive
The lastdrive command is used in the CONFIG.SYS file to set the maximum number of drives that can be accessed.
Lh
The lh command is the shorthand version of the loadhigh command.
Loadfix
The loadfix command is used to load the specified program in the first 64K of memory and then runs the program.
Loadhigh
The loadhigh command is used to load a program into high memory and is usually used from within the autoexec.bat file.
Md
The md command is the shorthand version of the mkdir command.
Mem
The mem command shows information about used and free memory areas and programs that are currently loaded into memory in the MS-DOS subsystem.
Memmaker
The memmaker command is used to start MemMaker, a memory optimization tool.
Menucolor
The menucolor command is used in the CONFIG.SYS file to set text colors.
Menudefault
The menudefault command is used in the CONFIG.SYS file to set the startup configuration that will be used if no key is pressed within the specified timeout period.
Menuitem
The menuitem command is used in the CONFIG.SYS file to create a startup menu from which you can select a group of CONFIG.SYS commands to be processed upon reboot.
Mkdir
The mkdir command is used to create a new folder.
Mode
The mode command is used to configure system devices, most often COM and LPT ports.
More
The more command is used to display the information contained in a text file. The more command can also be used to paginate the results of any other Command Prompt or MS-DOS command.
Move
The move command is used to move one or files from one folder to another. The move command is also used to rename directories.
Msav
The msav command starts Microsoft Antivirus.
Msbackup
The msbackup command starts Microsoft Backup, a tool used to back up and restore one or more files.
Mscdex
The mscdex command is used to provide CD-ROM access to MS-DOS.
Msd
The msd command starts Microsoft Diagnostics, a tool used to display information about your computer.
Nlsfunc
The nlsfunc command is used to load information specific to a particular country or region.
Numlock
The numlock command is used in the CONFIG.SYS file to specify the state of the NumLock key.
Path
The path command is used to display or set a specific path available to executable files.
Pause
The pause command is used within a batch or script file to pause the processing of the file. When the pause command is used, a "Press any key to continue..." message displays in the command window.
Power
The power command is used to reduce the power consumed by a computer by monitoring software and hardware devices.
The print command is used to print a specified text file to a specified printing device.
Prompt
The prompt command is used to customize the appearance of the prompt text in Command Prompt or MS-DOS.
Qbasic
The qbasic command starts QBasic, the MS-DOS based programming environment for the BASIC programming language.
Rd
The rd command is the shorthand version of the rmdir command.
Rem
The rem command is used to record comments or remarks in a batch or script file.
Ren
The ren command is the shorthand version of the rename command.
Rename
The rename command is used to change the name of the individual file that you specify.
Replace
The replace command is used to replace one or more files with one or more other files.
Restore
The restore command is used to restore files that were backed up using the backup command. The backup command was only available up to MS-DOS 5.00 but the restore command was included by default with later versions of MS-DOS to provide a way to restore files that were backed up in previous versions of MS-DOS.
Rmdir
The rmdir command is used to delete an existing or completely empty folder.
Scandisk
The scandisk command is used to start Microsoft ScanDisk, a disk repair program.
Set
The set command is used to display, enable, or disable environment variables in MS-DOS or from the Command Prompt.
Setver
The setver command is used to set the MS-DOS version number that MS-DOS reports to a program.
Share
The share command is used to install file locking and file sharing functions in MS-DOS.
Shell
The shell command is used in the CONFIG.SYS file to specify the command interpreter that DOS should use.
Shift
The shift command is used to change the position of replaceable parameters in a batch or script file.
Smartdrv
The smartdrv command installs and configures SMARTDrive, a disk caching utility for MS-DOS.
Sort
The sort command is used to read data from a specified input, sort that data, and return the results of that sort to the Command Prompt screen, a file, or another output device.
Stacks
The stacks command is used in the CONFIG.SYS file to set the number and size of stack frames.
Submenu
The submenu command is used in the CONFIG.SYS file to create a multi-level menu from which you can select startup options.
Subst
The subst command is used to associate a local path with a drive letter. The subst command is a lot like the net use command in Windows except a local path is used instead of a shared network path. The subst command replaced the assign command beginning with MS-DOS 6.0.
Switches
The switches command is used in the CONFIG.SYS file to configure DOS in a special way, like to tell DOS to emulate different hardware configurations.
Sys
The sys command is used to copy the MS-DOS system files and command interpreter to a disk. The sys command is used most often to create a simple bootable disk or hard drive.
Time
The time command is used to show or change the current time.
Tree
The tree command is used to graphically display the folder structure of a specified drive or path.
Type
The type command is used to display the information contained in a text file.
Undelete
The undelete command is used to undo a deletion performed with the MS-DOS delete command.
Unformat
The unformat command is used to undo the formatting on a drive performed by the MS-DOS format command.
Ver
The ver command is used to display the current MS-DOS version number.
Verify
The verify command is used to enable or disable the ability of Command Prompt, or MS-DOS, to verify that files are written correctly to a disk.
Vol
The vol command shows the volume label and a serial number of a specified disk, assuming this information exists.
Vsafe
The vsafe command is used to start VSafe, a basic virus protection system for MS-DOS.
Xcopy
The xcopy command can copy one or more files or directory trees from one location to another. The xcopy command is generally considered a more "powerful" version of the copy command though the robocopy command trumps even xcopy.
Windows vs. DOS Commands
The commands in Windows are available from the Command Prompt and are called Command Prompt commands or CMD commands, but they are not DOS commands.
Instead, check out our List of Windows CMD Commands for all of the command line options you have available to you in Windows. We also have a command comparison table to show which commands are available in different Microsoft operating systems.
If you're interested, there are also Windows-specific lists, which you can find in these Windows 8 commands, Windows 7 commands, and Windows XP commands documents.
Was this page helpful?
Thanks for letting us know!
Get the Latest Tech News Delivered Every Day
Email Address
There was an error. Please try again.
You're in! Thanks for signing up.
There was an error. Please try again.
Thank you
for signing up.
Tell us why!
More from Lifewire
Windows 8 Command Prompt Commands
Command Prompt: What It Is and How to Use It
Windows XP Command Prompt Commands
Command Availability Across Microsoft Operating Systems
List of Command Prompt Commands
Command Line Commands for Control Panel Applets
Windows 7 Command Prompt Commands
How to Open File Explorer in Windows 11
What Is a Redirection Operator?
How to Open Command Prompt
How to Read Command Syntax
Sfc Command (System File Checker)
Ping Command
Format Command
What Is File Allocation Table (FAT)?
Attrib commands (examples, options, switches, etc.)